Multi-parameter Monitor for Pets

Short Description:

Narigmed’s animal oximeter supports measurement of an ultra-wide heart rate range, as well as measurement of parts such as the ear.

Send email to us

Description

FAQ

Product Attributes

TYPE	Home monitoring pet hospital
Category	beside oximeter for animals
Series	narigmed® BTO-100CXX-VET
Package	1pcs/box, 18box/carton
Display type	5.0 inch LCD
Display parameter	SPO2PRPIRR
SpO2 measurement range	35%~100%
SpO2 measurement Accuracy	±2%（70%~100%）
PR measurement range	20~300bpm
PR measurement Accuracy	The greater of ±2bpm and±2%
Anti-motion performance	SpO2±3% PR ±4bpm
Low perfusion performance	SPO2 ±2%, PR ±2bpm,
low perfusion can be supported at least	0.025%
new parameter	respiratory rate(RR)
perfusion Index Range	0.02%~20%
Respiratory rate	4rpm~70rpm
Initial output time/Measurement time	4s
Alarm management system	YES
Probe drop detection	YES
historical trend data	YES
One click to turn off the alarm	YES
Animal type management	YES
Suitable animal	Suitable for cats, dogs, cows and other animals whose heart rate ranges from 20 to 300bpm
Typical power consumption	<40mA
Weights	803g(without bag)
Dismension	26.5cm16.8cm9.1cm
Product Status	Self-developed products
Voltage - Supply	Type-C 5V or Lithium battery power supply
Operating Temperature	5°C ~ 40°C 15%~95%( humidity) 50kPa~107.4kPa
storage environment	-20°C ~ 55°C 15%~95%( humidity) 50kPa~107.4kPa

Following Features

1 High precision measurement at low perfusion

2 Suitable for cats, dogs, cows and other animals whose heart rate ranges from 20 to 300bpm, if you exceed this range, we can customize the adjustment.

3 Wider application parts: There are many animals that cannot be worn on the tongue for measurement during detection, such as cats and rabbits. The tongues are too small, so smartly choose to wear them on the ears and other parts. However, the ears often have very low perfusion and very poor signals. Narigmed designs them through special probes and software algorithms. It can solve such problems and make it easy to display the value when wear the probe.

4 Small size, easy to place, the product is stable and not easy to fall due to pulling, and the probe uses a SCSI interface with a lock that is not easy to loosen.

5 Four parameters (Spo2PRRRPI) display, with historical trend display and alarm event query, the upgraded version also supports blood pressure measurement.

Everything we do is generally aligned with our purpose of "Shoppers First, Trust First, Committed to Innovative Design"
New product BTO-100 multi-parameter surgical hospital monitoring system modular bedside vital signs patient monitor. The packaging and products of the patient monitor are high performance and safe. We sincerely hope to establish some satisfactory interactions with you in the short term. . We will keep you informed of our progress and work with you to establish a stable small business relationship.
As the company continues to grow, new patient monitors and medical devices are constantly being launched. Now our products and solutions are sold and served in more than 15 countries around the world, such as Europe, North America, the Middle East, South America, South Asia, etc. We understand that innovation is critical to our growth, so new product development is ongoing. In addition, our flexible and efficient operating strategies, high-quality merchandise and competitive prices are exactly what our customers are looking for. Excellent service also brings us good reputation.

Narigmed’s beside oximeter for animals can be easily placed anywhere for cats, dogs, cow, horses, etc., veterinarians can measure Blood oxygen(Spo2), pulse rate(PR), respiration(RR) and perfusion index parameters(PI) for animals by it. Narigmed’s beside oximeter support the measurement of ultra-wide heart rate range, and the measurement of ears and other parts. Ear perfusion is often very low, the signal is very poor, Nairgmed through a special probe, software algorithm matching design can solve such problems, it is easy to display the measurement value when wear the Narigmed’s probe.

Previous: narigmed NOPC-01 silicone wrap spo2 sensor with lemo connector

Next: FRO-100 CE FCC RR Spo2 Pediatric Pulse Oximeter Home Use Pulse Oximeter

1.Are you a factory?

We are the source factory of finger pulse oximeter. We have our own medical product registration certificate, production quality system certification, invention patent, etc.

We have more than ten years of technical and clinical accumulation of ICU monitors. Our products are widely used in ICU, NICU, OR, ER, etc.

We are a source factory integrating R&D, production and sales. Not only that, in the oximeter industry, we are the source of many sources. We have supplied blood oxygen modules to many well-known oximeter brand manufacturers.

(We have applied for multiple invention patents and product appearance patents related to software algorithms.)

In addition, we have a complete ISO:13485 management system, and we can assist customers with related product registration.

2. Is your blood oxygen level accurate?

Of course, accuracy is the basic requirement that we must meet for medical certification. We not only meet the basic requirements, but we even consider the accuracy in many special scenarios. For example, motion interference, weak peripheral circulation, fingers of different thicknesses, fingers of different skin colors, etc.

Our accuracy verification has more than 200 sets of comparative data covering the range of 70% to 100%, which are compared with the blood gas analysis results of human arterial blood.

The accuracy verification in the exercise state is to use exercise tooling to exercise with a certain frequency and amplitude of tapping, friction, random movement, etc., and compare the test results of the oximeter in the exercise state with the results of the blood gas analyzer for arterial blood Validation, it would be helpful for some patients such as patients with Parkinson’s disease to measure use. Such anti-exercise tests are currently only done by three American companies in the industry, masimo, nellcor, Philips, and only our family has done this verification with finger clip oximeters.

3. Why does blood oxygen fluctuate up and down?

As long as the blood oxygen fluctuates between 96% and 100%, it is within the normal range. Generally, the blood oxygen value will be relatively stable under even breathing in a quiet state. Fluctuations of one or two values in a small range are normal.

However, if the human hand has movement or other disturbances and changes in breathing, it will cause large fluctuations in blood oxygen. Therefore, we recommend that users keep quiet when measuring blood oxygen.

4. 4S fast output value, is it real value?

There are no settings such as “created value” and “fixed value” in our blood oxygen algorithm. All displayed values are based on body model collection and analysis. 4S rapid value output is based on rapid identification and processing of pulse signals captured within 4S. This requires a lot of clinical data accumulation and algorithm analysis to achieve accurate identification.

However, the premise for rapid 4S value output is that the user is still. If there is movement when the phone is turned on, the algorithm will determine the reliability of the data based on the collected waveform shape and selectively extend the measurement time.

5. Does it support OEM and customization?

We can support OEM and customization.

However, since the logo screen printing requires a separate screen printing screen and separate material and bom management, this will lead to an increase in our product cost and management cost, so we will have a minimum order quantity requirement. MOQ:1K.

The logos we can provide can appear on product packaging, manuals, and lens logos.

6. Is it possible to export?

We currently have English versions of packaging, manuals and product interfaces. And it has obtained medical certification from the European Union CE (MDR) and FDA, which can support global sales.

At the same time we also have FSC free sales certificate (China and EU)

However, for some specific countries, it is necessary to understand the local access requirements, and some countries also need a separate permit.

Which country are you exporting to? Let me confirm with the company whether that country has special regulatory requirements.

7. Is it possible to support registration in XX country?

Some countries require additional registration for agents. If an agent wants to register our products in that country, you can ask the agent to confirm what information they need from us. We can support providing the following information:

510K authorization certificate

CE (MDR) authorization certificate

ISO13485 qualification certificate

Product information

According to the situation, the following materials can be optionally provided (need to be approved by the sales manager):

General Safety Inspection Report for Medical Devices

Electromagnetic compatibility test report

Biocompatibility test report

Product clinical report

8. Do you have a medical qualification certificate?

We have done domestic medical device registration and certification, FDA’s 510K certification, CE certification (MDR), and ISO13485 certification.

Among them, we got the CE certification (CE0123) from TUV Süd (SUD), and it was certified in accordance with the new MDR regulations. Currently, we are the first domestic manufacturer of finger clip oximeter.

Regarding the production quality system, we have ISO13485 certificate and domestic production license.

In addition we have a Free Sale Certificate (FSC)

9. Is it possible to be the exclusive agent in the region?

Exclusive agency can be supported, but we need to provide you with exclusive agency rights after applying to the company for approval based on your company’s operating status and expected sales volume.

Usually it is a certain country where some big agents have great local influence and market share, and they are willing to promote our products, so they can cooperate.

10. Are your products new? How long has it been sold?

Our products are new and have been on the market for a few months. They are exclusively designed and positioned as high-end products. We currently have a small number of customers for OEM sales. Because of the registration certificate, it has not officially entered the FDA and CE markets. It will be sold in North America and the European Union after getting the registration certificate in November.

11. Have your products been sold before? What’s the review?

Although our products are new products, tens of thousands of them have been shipped so far, and the product quality is stable. We have been making oximeter for more than ten years, and we are aware of any customer feedback problems. We have done failure mode analysis (DFMEA/PFMEA) for every defect, from product design and development, production, raw material quality control, product inspection, packaging Control the quality of the whole process, such as delivery, to avoid possible risks.

In addition, our product design has its own characteristics, is very sensitive, and the client evaluation is quite high.

12. Is your product a private model? Is there any risk of infringement?

This is our private model, and we have applied for our product appearance patents and invention patents related to software algorithms.

Our company has a dedicated person responsible for the protection of intellectual property products. We have done a full analysis of intellectual property rights for our products, and at the same time made a layout for the corresponding intellectual property protection of our products and technologies.

infant patient monitor